Model AD-8922 provides both an external weight display and remote operator controls for virtually all A&D balances and scales.  When the weighing device just isn’t enough, this economical and easy-to-install solution should be your first choice.  Sporting a clean, modern look, the AD-8922  provides a bright, blue vacuum flourescent display that is unmistakeably readable in any environment. 

Data received from the weighing instrument can be also output to a PC or printer via RS232C (DIN connector).

                                                                      
Features:

• Compatible with A&D Series:

Balances:                                                   
Toploader - GX, GF, GF-K, GX-K, HF/HF-G, AD-4212
Analytical - GH, HM, HR, HR-i, GR
Industrial  - GP, FP 
Compact   - EK-i, EK-H, EW-i,EK-G, EW-G

Scales:
FS, FS-KL, FG, HV-G, HW-G, HV-WP, FC-i, FC-Si

• Bright blue vacuum florescent display
• Interfaces to the A&D Balance/Scale RS-232C port, yet provide an extended RS-232C port for additional interface with a PC or printer.
• Small, clean, modern design is gentle on space requirements.
• Table or Panel Mount
  

Specifications:

Power Consumption	Appx. 11VA, including AC Adapter
Display	7 Digit VFD, 13mm
Signal	RS-232C
Baud Rate	600 bps ~ 1,900 bps
Length, Parity Bit	7 bits-even, 7 bits-odd, 8 bits-none
Stop Bits	1 or 2
Terminator	or
Dimensions (HWD)	170 x 238 x 132 mm / 6.7 x 9.4 x 5.2"
New Weight	Appx. 1kg / 2.2 lb
Standard Accessories	AC Adapter, instruction manual, & 7 cable with DB-25 male for weighing device

Requirements:

• HM, HR, FP, EW-G, EK-G, EK-H, FS, FS-KL, & FG require optional RS-232C Interface.

For Cable Connection to weigh device:

• DB-9F to DB-9F (purchase separately) required for EK-i, EW-i, GH, HR-i,
  FC-i, & FC-Si
• A&D Part# KO:577-200 (purchased separately) required for HV-G, HW-G, HV-WP, &HW-WP 
  

Literature:

Spanish
 AD-8922 ESP.pdf